eaDonNTU, Donetsk >
Научные труды ДонНТУ >
Серія: Електротехніка та енергетика >
Випуск № 2 (15) >
Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
http://ea.donntu.ru/handle/123456789/23505
|
Название: | МАТЕМАТИЧНА МОДЕЛЬ ВІТРОГЕНЕРАТОРА ТИПУ DFIG ДЛЯ АНАЛІЗУ СТІЙКОСТІ ЕЛЕКТРИЧНИХ СИСТЕМ |
Другие названия: | Математическая модель ветрогенератора типа DFIG для анализа устойчивости электрических систем DFIG Wind Turbine Mathematical Model For Power Systems Stability Analysis |
Авторы: | СКРИПНИК, О.І. КОНОВАЛ, В.С. СКРЫПНИК, А.И. КОНОВАЛ, В.С. SKRYPNYK, О. KONOVAL, V. |
Ключевые слова: | стійкість енергетичних систем асинхронний генератор з подвійним живленням вітрова станція математична модель устойчивость электрических систем асинхронный генератор с двойным питанием ветровая станция математическая модель динамическая модель Power System stability doubly fed induction generator wind power farm mathematic model dynamic model |
Дата публикации: | 2013 |
Издатель: | ДонНТУ |
Библиографическое описание: | Наукові праці Донецького національного технічного університету. Серія "Електротехніка і енергетика". № 2 (15), 2013 р., 338 с. |
Серия/номер: | Электротехника и энергетика; |
Аннотация: | Розглянуто аспекти моделювання вітрогенератора типу DFIG для аналізу усталених режимів та
стійкості електричних систем. Наведено особливості цифрової реалізації модуля вітрогенератора в комплексі
ДАКАР та результати тестових розрахунків стійкості вітрової станції, приєднаної до електричної системи
під час аварійних збурень. |
Описание: | To construct a complete WTG
model, three device models are used: Generator/converter model, Electrical control model, Turbine and turbine control
model. The generator/converter model injects real and reactive current into the network in response to control
commands, and represents low and high voltage protective functions. This model is the equivalent of the generator and
field converter, and provides the interface between the WTG and the network. The electrical control model includes
both closed and open loop reactive power controls, and voltage regulation detailed model. The WindCONTROL
emulator function represents a simplified equivalent of the supervisory VAR controller portion of the entire wind farm
management system. The function monitors o specified bus voltage and compares it against the reference voltage. The
wind turbine model provides a simplified representation of a very complex electro-mechanical system. In simple terms,
the function of the wind turbine is to extract as much power from the available wind as possible without exceeding the
rating of the equipment. The wind turbine model represents the relevant controls and mechanical dynamics of the wind
turbine. The turbine control model represents the mechanical controls, including blade pitch control and power order
(torque order in the actual equipment) to the converter; under speed trip; rotor inertia equation; wind power as a
function of wind speed, blade pitch, rotor speed; and active power control. The results of this work can be basic point
for future studies. The dynamic model for the full converter and fixed-speed wind turbines also can be introduced. |
URI: | http://ea.donntu.edu.ua/handle/123456789/23505 |
Располагается в коллекциях: | Випуск № 2 (15)
|
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.
|